Open Context



The primary purpose of the excavation and recording procedures that follow is to accurately describe and record the stratigraphy of the area being explored. In order to do this the general principle will be to investigate each stratum individually. Each stratum, along with other features and deposits/cuts will be designated as a separate \x91locus'. For each locus, the dimensions and detailed description of the material culture will be recorded.

In order to remove the materials that make up each stratum a variety of excavation techniques will be employed. The primary intended method of excavation for VT14 will be to break up soil using the pointed end of a pick-axe. For strata that contain an abundance of material, soil will be removed in the trench using trowels and sorted while in the trench, directly into buckets. However, depending on what is uncovered in VT14, the methods of excavation may change, as the trench and the remains found in it dictate the method of excavation.

Terracotta roofing tiles and plaster will be counted by bowls. The bowl used for counting these materials has a diameter of 25cm and a maximum depth of 10cm. Once tile and plaster have been counted, they will be discarded in a tile dump, which will be established approximately 10m south of the trench. Pottery and bone will be counted individually and sorted into 1 liter (~23x9x6 cm) latte boxes.

For any special finds recovered from the trench, coordinates and elevations will be taken. In order to determine the coordinates, a plumb bob will be held over the location of the special find, and then the distance from east-west and north-south baselines established on site will be determined using a tape measure held at a right angle from the string of the plumb bob to the baseline. In order to determine the elevation of special finds, once again a plumb bob will be held over the find spot of the special find. Simultaneously, a string with a line level will be attached to a fixed datum point and will be pulled taught and level, so that it intersects with the string of the plumb bob. A tape measure will be held so that

it runs parallel to the string of the plumb bob, and the elevation relative to the datum point may then be determined. As the elevation of the datum point (306.21 mASL) on the Vescovado grid system (see Trench Layout) is known, the elevation relative to sea level of any special find may then be determined.

Property or Relation Value(s)
Temporal Coverage
[Standard: Dublin Core Terms]
Editorial Note

Open Context editors work with data contributors to annotate datasets to shared vocabularies, ontologies, and other standards using 'Linked Open Data' (LOD) methods.

The annotations presented above approximate some of the meaning in this contributed data record to concepts defined in shared standards. These annotations are provided to help make datasets easier to understand and use with other datasets.

Suggested Citation

Andrew J. Carroll. "VT 14 (2016-07-03):13-18; Methodology from Italy/Vescovado di Murlo/Upper Vescovado/Vescovado 14/2016, ID:726". (2017) In Murlo. Anthony Tuck (Ed.) . Released: 2017-10-04. Open Context. <>

Editorial Status

Managing editor reviewed

Part of Project


Mapping Data

Copyright License

Attribution 4.0

To the extent to which copyright applies, this content carries the above license. Follow the link to understand specific permissions and requirements.
Required Attribution: Citation and reference of URIs (hyperlinks)